FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 504 Parts

Category: Hydraulic System

[Categories] [All 504 Parts] [All Farmall Models]

No
Picture
Hitch Hydraulic - PUMP - 12 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104233, Ref: R2965) $441.08

Hydraulic Filter - Hydraulic oil filter, for gear drive tractors with pumps up to 12 gpm. Not for hi-capacity power supply. For tractors: 340, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. (Item #: 111116, Ref: 388084R93) $37.30

Hydraulic Pump - For International / Farmall tractor models Hydro 100, Hydro 186, 504, 606, 966, 1066, 2504, 2606, 3488, Replaces International OEM number 378866R94, 1949294C1, 378865R92, 4.5 GPM, Draft Control, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 150707) $532.00

Hydraulic Pump - Hydraulic Pump, 12 GPM Main Hitch Pump. Note: Pump pressure is rated at 2250 PSI, exceeding pressure may damage pump and void the warranty. Open back type, can be used with piggy-back pump. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Replaces 1949296C1, 70933C91, 373964R93. (Item #: 104233, Ref: 70933C91) $441.08

Hydraulic Pump - Pump is open back type to use with piggy-back pump, 17 GPM rating, max PSI of 2250. Not for use in 12 GPM systems. If system is 12 GPM, use 1949296C1. For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 21026, 21256, 21456, Hydro 100. Hydraulic Pump is 17 GPM. (Item #: 104237, Ref: 70935C91) $370.00

Hydraulic Pump Back Plate with Gasket - For International / Farmall tractor models Hydro 100, Hydro 186, 330, 340, 460, 504, 544, 560, 606, 656, 660, 756, 766, 786, 806, 826, 856, 886, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Compatible with International Construction and industrial models 2504, 21206, 21256, 21456, Replaces International OEM number 371524R1, 71265C1, (Item #: 122682) $20.10

Hydraulic Pump Backplate Gasket - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186, 330, 340, 450, 460, 504, 544, 560, 606, 656, 660, 706, 786, 806, 826, 856, 886, 986, 1026, 1066, 1086, 1206, 1466, 1468, 1486, 1566, 1568, 1586, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, 21256, 21456, Replaces International OEM number 71265C1, 371543R1, 371543R2, For Pumps 70631C91, 70932C91, 70933C91, 70935C91, (Item #: 111636) $4.90

Hydraulic Pump Mounting Gasket - Used on many Farmall / International models, this gasket replaces OEM part numbers: 251068R1, 355362R91, 350708R1, 360691R91, 360957R91, 761107R93, 762318R91, 762200R92, 762309R91, 762428R91, 762197R91, 764940R91 (Item #: 167973, Ref: 350708R2) $2.60

Hydraulic Pump, Hitch - PUMP - 17 GPM For 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826 (Item #: 104237, Ref: R2966) $370.00

Remote Valve Assembly, Used - For International tractor models Hydro 70, Hydro 86, 404, 504, 544, 606 (s/n 6754-later), 656, 664, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, 2404, 2504, 2544, 2606 (s/n 6754-later), 2656, 2706, 2756, 2806, 2826, 2856, 4100, 21206, 21256, Replaces International OEM nos 390826R94, 390826R91, 390826R92, 390826R93, Open on 1 side only, 1500 psi to 2000 psi, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496748) $349.01

Universal Parts and Accessories
Category: Hydraulic System

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All 504 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy